Pentax 67II Features
The 67II offers greatly improved performance, grip, focusing and reliability,
while retaining compatibility with existing 67components: Lenses, Finders and Accessories.
• Metering with the AE Pentaprism Finder offers Aperture Priority AE
and six-segment multi-pattern metering. Also Exposure Lock has been added.
• The 67II is equipped with a TTL direct flash metering sensor inside the body.
• There is a Power Saving Time Exposure Switch
• The new Pentax Natural-Bright Microprism Matte focusing screen comes standard
but it can be replaced by a choice of seven different Bright focusing screens.
• The large LCD data panel automatically adjusts to the level of the incident light.
• Pressing the multiple exposure switch while cocking the wind-up lever.
• Single Action Film Selection Switch 120 roll film (10 frames) and 220 roll film (21 frames)
There is a 12 second delayed action electronic self-timer which confirmation beep.
• There is a memo holder.
• The 67II is powered by two 3V lithium batteries for extended battery life and
improved low-temperature performance.
• Most existing 67-system lenses and accessories can be used with the 67II. |
|
Pentax 67II Specifications |
|
6x7 ideal-format single-lens-reflex camera with TTL auto exposure control. |
|
|
|
120 roll film (10 exposures) or 220 roll film (21 exposures) Image Size: 55mm x 70mm. |
|
|
|
Dual bayonet mount (with inner and outer bayonets). |
|
|
|
Aperture-Priority (AE Prism), Metered Manual and Bulb. |
|
|
|
Electronically controlled horizontal-run-focal-plane cloth shutter |
|
|
|
1/1000 sec. – 30 sec. stepless (auto); 1/1000 sec. – 4 sec.(manual) |
|
|
|
1/30 sec. Bulb and time exposure available. 1/500 second with leaf-shutter lens.
Electro-magnetic release. Shutter locked with main power off. |
|
|
|
(AE Penta-prism Finder 67II, Pentaprism Finder 67II, Folding Focusing hood 67II, Rigid Magnifying Hood 67II. |
|
|
|
Interchangeable Natural Bright Microprism Matte. |
|
|
|
90% with AE Pentaprism Finder 67II, or Penta-prism Finder 67II ; 100% with Folding Focusing Screen Hood 67II, or
Rigid Magnifying Hood 67II. |
|
|
|
0.75x (with 105mm lens at infinity and –1 diopter) |
|
|
|
TTL six-segment multi-pattern metering, center-weighted metering or
spot metering with optional AE Penta-prism Finder 67II |
|
|
|
EV2 – EV21 (at ISO 100 with 105mm f/2.4 lens) with AE Penta-prism Finder 67II |
|
|
|
+/-3EV in 1/3 EV steps. Dial-control system. Memory lock available with AE Penta-prism Finder 67II |
|
|
|
Exposure compensation, bar-graph pointer, shutter speed, metering mode,
memory lock, flash status and exposure frame counter. Backlight illuminated in AE Penta-prism Finder 67II |
|
|
|
Battery exhaustion warning, ISO film speed, film loading confirmation,
film-advance indicator, exposure frame counter and flash status |
|
|
|
ISO 6 – 6400 with optional AE Penta-prism Finder 67II
Film Transport: Wind-up lever has 190º stroke and 7º stand-off angle. Semi-automatic film loading from start mark. Film-advance/ film-end indicator in LCD panel. |
|
|
|
Electronically controlled 12-second delay with aubible indicator Mid-operation cancellation possible. |
|
|
|
|
|
|
Instant-return mirror with mirror lock-up. |
|
|
|
X-sync terminal and 4-PIN/5-PIN TTL auto flash terminals, TTL direct auto flash sensors built in the body. |
|
|
|
Two 3V Lithium batteries (CR-123A type) Approx. 500 rolls of 120 film and approx. 250 rolls of 220 film. |
|
|
|
185.5mm (W) x 151.0mm (H) x 106.0mm (D) (7.3" x 5.9" x 4.2").
1660g (58.6 oz.) with AE Pentaprism Finder 67II and without batteries. |
|